Power Over Ethernet Injector 6-Port / 12-Port Features Provides power to the infrastructure device / access point over the Ethernet cable Remote Power Feeding - Access Point receives power over the Ethernet cable Centralized Power Distribution - Multiple access points can be connected to a single PoE Injector Smart Ethernet Wiring - PoE Injector acts as a normal patch panel and places ˜ 48.0 VDC on unused Ethernet pins Automatic Load Sensing - Power control circuitry automatically detects Power Over Ethernet on access point before providing power No. of Users 6 Data Rates 10/100 Mbps Power over LAN Output Specifications Pin Assignments 4/5, 7/8 Output Power Voltage -48Vdc User Port Power 16W (maximum), (-48Vdc) Aggregate Power 192W (-48Vdc) Input Power Requirements AC Input Voltage: 90 - 264Vac AC Frequency: 47 - 63Hz Input Power 150W, (-48Vdc) AC Input Current 1.8A at 100Vac, 0.8A at 240Vac, (-48Vdc) Volt Amperes Rating 0.18KVA, (-48Vdc) Dimensions (HxWxD) 1.757 x 8.5 x 13.2 in/4.44 x 21.5 x 33.5 cm Weight 3.3 lbs/5 kg Management (LED Display) V.24/RS-232 System Indicator AC Power (Green), Alarm (Orange) User Indicator Channel Power (Green), Alarm (Orange) Connectors Shielded RJ-45EIA 568A and 568BDB-9, Female (Management) Environmental Conditions Operating Temperature: 32° to 104° F/0° to 40° C Operating Humidity: Maximum 90% non-condensing Storage Temperature: -13° to 185° F/ -25° to 85° C Storage Humidity: Maximum 95% non-condensing Operating Altitude: -1000 to 10,000 ft. (-304.8 to 3048 m) Thermal Rating 127.5 BTU (-48Vdc) Regulatory Compliance CE Compliance Electomagnetic Emission and Immunity FCC Part 15 Class B EN55022 Class B (Emission) EN50082-1 (Immunity) Safety Approval UL 1950 CSA C22.2 No. 950 EN 60950 TUV EN 60950